Endress+Hauser Proline Promag W 800 - Page 115

Proline Promag W 800 Technical data
Endress+Hauser 115
Remote version (wall-mount housing)
• Housing material:
Polycarbonate
• Window material:
Polycarbonate
Sensor connection housing
• Aluminum, AlSi10Mg, coated
• Polycarbonate plastic (only in conjunction with order code for "Sensor option", options CB
… CE)
Cable entries/cable glands
Compact and remote versions and sensor connection housing
Cable entry/cable gland Material
Cable gland M20 × 1.5 Plastic
Remote version: cable gland M20 × 1.5
Option of armored connecting cable
• Sensor connection housing:
Nickel-plated brass
• Transmitter wall-mount housing:
Plastic
Adapter for cable entry with female thread G ½" or
NPT ½"
Nickel-plated brass
Connecting cable for remote version
Electrode and coil current cable:
• Standard cable: PVC cable with copper shield
• Armored cable: PVC cable with copper shield and additional steel wire braided jacket
Sensor housing
• DN 25 to 300 (1 to 12")
• Aluminum half-shell housing, aluminum, AlSi10Mg, coated
• Fully welded carbon steel housing with protective varnish
• DN 350 to (14 to ")
Fully welded carbon steel housing with protective varnish
Measuring tubes
• DN 25 to 600 (1 to 24")
Stainless steel: 1.4301, 1.4306, 304, 304L
• DN 700 to 9003000 (28 to 36120")
Stainless steel: 1.4301, 304
Liner
• DN 25 to 300 (1 to 12"): PTFE
• DN 25 to 900 (1 to 36"): polyurethane
• DN 50 to 900 (2 to 36"): hard rubber
Electrodes
• Stainless steel, 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)