What to do if Endress+Hauser Proline Promag W 800 shows correct value on display but signal output is incorrect?
If your Endress+Hauser Measuring Instruments device shows the correct value on the local display but the signal output is incorrect (though within the valid range), it is likely due to a configuration error. Check and correct the parameter configuration.
Why is my Endress+Hauser Measuring Instruments device not responding via SmartBlue App?
If your Endress+Hauser Measuring Instruments device is not responding via the SmartBlue App, it may be due to the absence of a Bluetooth connection or because the device is already connected to another smartphone or tablet. Ensure that the Bluetooth function is enabled on your smartphone or tablet.
Why is my Endress+Hauser Proline Promag W 800 Measuring Instruments measuring incorrectly?
If your Endress+Hauser Measuring Instruments device is measuring incorrectly, it could be due to a configuration error or operation outside of the specified application limits. To resolve this: 1. Check and correct the parameter configuration. 2. Observe the limit values specified in the Technical Data.
How to fix write access to parameter not possible on Endress+Hauser Proline Promag W 800?
If write access to a parameter is not possible, it may be because hardware write protection is enabled. Check the user role, enter the correct customer-specific access code, or verify the hardware write protection via DIP switch.
General| Device Type | Electromagnetic Flowmeter |
|---|---|
| Measurement Principle | Faraday's law of electromagnetic induction |
| Housing Material | Aluminum, stainless steel |
| Pressure Rating | Up to 40 bar |
| Output Signal | 4 to 20 mA HART, Modbus RS485, PROFIBUS DP, PROFINET |
| Power Supply | 24 V DC |
| Process Connection | Flange (EN, ASME, JIS) |
| Lining Material | PTFE, rubber |
| Electrode Material | 316L stainless steel, Hastelloy, titanium |
| Degree of Protection | IP67 |
Explains the purpose and scope of the operating instructions.
Defines various symbols used in the document for safety, electrical, and communication.
Provides an overview of the technical documentation scope and available documents.
Outlines qualifications and authorizations for personnel performing installation, commissioning, etc.
Specifies the device's intended application for liquid flow measurement and conditions for use.
Describes the physical components and structure of the device, including standard and advanced versions.
Details the steps and checks for receiving and verifying the device upon delivery.
Explains how to identify the device using nameplates, order codes, and serial numbers.
Provides guidelines for storing the device safely to prevent damage and maintain condition.
Details the procedure for storing the device, differentiating between standard and advanced versions.
Outlines methods and precautions for safely transporting the measuring device.
Specifies general requirements and considerations for installing the device, including mounting position.
Provides detailed steps and instructions for physically installing the sensor and transmitter.
Lists checks to perform after the device has been mounted to ensure correct installation.
Covers general electrical safety precautions in accordance with national regulations.
Details requirements for connecting cables, tools, and general connection aspects.
Provides step-by-step instructions for connecting the sensor and transmitter to the device.
Explains how to insert and connect battery packs for the standard version.
Details battery pack and buffer capacitor insertion for the advanced version.
Instructs on connecting the pressure sensor to the advanced transmitter.
Describes connecting and inserting batteries into the external battery pack.
Provides specific examples for pulse output connections.
Outlines steps to maintain the device's IP rating after electrical connection.
Lists checks to ensure correct electrical connections and device setup.
Gives a general overview of how the device can be operated and configured.
Explains how to connect to and use the SmartBlue app for device operation and configuration.
Lists available device description files and operating tools for system integration.
Emphasizes completing pre-commissioning checks for successful startup.
Details steps like installing and connecting the SmartBlue app before commissioning.
Guides through the process of configuring the device parameters using a wizard.
Describes methods to prevent unintentional changes to device settings after commissioning.
Explains how to interact with the display to view values and status information.
Describes how to adjust device settings to match specific process requirements.
Details the procedure for resetting the device's totalizers.
Explains how to disable and re-enable the Bluetooth communication.
Guides on activating additional software functions.
Provides instructions on how to update the device's firmware.
Outlines the procedure for checking, verifying, or calibrating the device.
Offers solutions for common issues related to the local display and output signals.
Explains how diagnostic messages are displayed and their meaning.
Describes how to change the diagnostic behavior assignments.
Provides a list and explanation of various diagnostic events.
Explains how to view and manage currently active diagnostic events.
Details how to display pending diagnostic events and their associated information.
Describes how to read, filter, and view information events from the logbook.
Explains how to reset device configuration to a defined state.
Details parameters that provide information for device identification.
Lists firmware versions and their release dates.
States that no special maintenance work is required and covers exterior cleaning.
Mentions available measuring and testing equipment from Endress+Hauser.
Lists maintenance and calibration services offered by Endress+Hauser.
Provides general notes on the repair and conversion concept and conversion notes.
Explains how to find and order spare parts using the Device Viewer.
Outlines procedures and precautions for returning a device.
Covers instructions for disposing of the device and its components responsibly.
Lists accessories specific to the Proline 800 transmitter and sensor.
Describes service-related accessories like software and apps.
Defines the intended application and media compatibility for the measuring device.
Explains the measuring principle and the device's system design.
Details the measured variables, measuring range, and flow characteristic values.
Describes the status/pulse output functions and their configurations.
Covers power supply options including batteries and external sources.
Specifies error limits, accuracy, and repeatability under reference conditions.
Refers to mounting requirements, directing to another section.
Details operating height, atmosphere, degree of protection, and vibration resistance.
Covers medium temperature range, conductivity, and pressure-temperature ratings.
Refers to external dimensions and installation lengths in another document.
Describes the device's operability via local display and SmartBlue app.
Guides on finding product certificates and approvals online.
Lists available packages to enhance device functionality.
Refers to an overview of available accessories.
Lists associated technical documentation and their codes.
To Next Page
