Entec ETMFC610 - Page 191

Multi-Function Control ETMFC610 http://www.entecene.co.kr
181
EN
HANCED
TEC
HNOLOGY
GLOBAL SETTING/ COMMUNICATION/ EVENT&ETC / CI Evt Method
Range
ALL, LAST
Default
ALL
Step
~
Set the counter event mode.
 ALL : all counter is buffed for same point.
 LAST : Only last event is buffed for same point.
GLOBAL SETTING/ COMMUNICATION/ EVENT&ETC / DO Cmd at Local
Range
OFF,ON
Default
OFF
Step
~
Set whether or not to control DO command on local control status.
GLOBAL SETTING/ COMMUNICATION/ EVENT&ETC / Time Syn’ Ref
Range
LOCAL,GMT
Default
LOCAL
Step
~
Set Reference Time Type. It signifies the time data type when Time
Synching with the master station.
NOTE :
This setting is set to be GMT and the setting values associated
with UTC(in “TIME ZONE” menu) are set up incorrectly, the
time internal clock in ETMFC610 can be changed incorrectly at
time synchronization.
[EVENT&ETC
SETUP]
>AI EvtBuff Size:256
CI EvtBuff Size:256
>BI Evt Method: ALL
AI Evt Method: ALL
>CI Evt Method: ALL
[ALL/LAST]
[EVENT&ETC SETUP]
>AI Evt Method: ALL
>CI Evt Method: ALL
>DO Cmd at Local:OFF
>Time Syn’ Ref:LOCAL
>Time Tag Type:LOCAL
[ALL/LAST]
[EVENT&ETC SETUP]
>AI Evt Method: ALL
>CI Evt Method: ALL
>DO Cmd at Local:OFF
>Time Syn’ Ref:LOCAL
>Time Tag Type:LOCAL
[LOCAL/GMT]