Entec ETMFC610 - 12 Status; Etmfc610

Multi-Function Control ETMFC610 http://www.entecene.co.kr
337
EN
HANCED
TEC
HNOLOGY
12. STATUS
Place the curser on “STATUS” in Main menu, press [ENT] button to move in this menu. This menu
has sub-menu as below. Press [ENT] to move into sub-menu.
12.1. ETMFC610
Move to “MAINTENANCE / STATUS / ETMFC610” to confirm tank and ETMFC610 status.
STATUS / ETMFC610
Present Switch(or CB) and ETMFC610 status are displayed.
Use [▼] [▲] button to check all items.
SWITCH
Displays Switch(or CB) status.(OPEN, CLOSE, TROUBLE)
TYPE
Displays control type.(Fault Indication type(FITYPE), Protection
type(PROTYPE))
PANEL LOCK
Displays panel lock status.(LOCK, UNLOCK)
CONTROL
Operation control select is displayed.(REMOTE, LOCAL, TROUBLE)
P-ROTECT
Phase fault indication function and phase protection function status is
displayed. (ON, OFF)
[ETMFC610]
>SWITCH : CLOSE
TYPE : FITYPE
>PANEL LOCK : UNLOCK
>CONTROL : LOCAL
>PHA-PROTECT: OFF
>GND-PROTECT: OFF
>LOOP CONTR.: OFF
LOCKOUT : OFF
>AC POW FAIL: ON
>BATTERY : NORMAL
>BATT&CHARGE: NORMAL
>DOOR OPEN : ON
>HANDLE : OFF
>GAS : NORMAL
[
STATUS
]
>1.ETMFC610
2.INPUT PORTS
3.OUTPUT PORTS
4.GOOSE S-IN
5.GOOSE D-IN
6.GOOSE OUT
7.LATCH LOGIC
8.DIAGNOSTIC