Entec ETMFC610 - Clear Saved Data

Multi-Function Control ETMFC610 http://www.entecene.co.kr
324
EN
HANCED
TEC
HNOLOGY
9.10. Clear Saved Data
Move to “EVENT / CLEAR SAVED DATA” to clear saved events. Passcode 3 certification is
required to enter “CLEAR SAED DATA” menu.
EVENT / CLEAR SAVED DATA
Clear Saved Data
Select an item to delete and press [ENT] button.
If deleting is completed, “EVENT CLEAR SUCCESS”
message is displayed.
11. ABOVE ALL
1 ~ 10 items are all deleted.
[CLEAR EVENT]
EVENT CLEAR SUCCESS
[CLEAR SAVED DATA]
>1.OPERATION
2.FAULT
3.FAULT CYCLE
4.SYSTEM
5.SET CHANGE
6.LOAD & ENERGY
7.DIGNOSTIC
8.PQM
9.PQM CYCLE
10.LOAD CURR’ ALARM
11.ABOVE ALL