Entec ETMFC610 - 17 Wireless Connection; Connection Using WIFI (PC)

Multi-Function Control ETMFC610 http://www.entecene.co.kr
360
EN
HANCED
TEC
HNOLOGY
17. Wireless Connection
ETMFC610 and ETIMS Interface Software can be connected wirelessly.
Wireless connectivity is as an option.
Table 17-1. Wireless Network Protocol Option
Wireless Network Protocol Supported
802.11 b/g/n
Wireless Network Frequency Range Supported
2.4Ghz
17.1. Connection using WIFI (PC)
It is possible to connect ETMFC610 wirelessly using ETIMS interface software. The connection
method is same as that of connecting to AP (Access Point). In order to establish a successful
connection, check the following setting items in advance.
Table 17-2. Setting Items
Item Menu Location
WIFI Use
GLOBAL SETTING / GENERAL / DEVICE / H/W OPTION/
SSID GLOBAL SETTING/ COMMUNICATION/ WIFI/
P/W GLOBAL SETTING/ COMMUNICATION/ WIFI/
Hidden SSID
GLOBAL SETTING/ COMMUNICATION/
Please refer to the ETIMS interface software manual for details of connection.