Entec ETMFC610 - GLOBAL Setting

Multi-Function Control ETMFC610 http://www.entecene.co.kr
57
EN
HANCED
TEC
HNOLOGY
6.2.2. GLOBAL Setting
SYSTEM
Set items related to power system and main body.
Consists of POWER LINE, CURRENT SENSING and VOLTAGE SENSING.
EVENT RECORDER
Set items related to the format of event behind recoded and whether event is recorded.
MONITORING
Set items related to monitoring for power system and ETMFC610.
Consists of LIVE LINE, OPERATION COUNT, CONTACT WEAR, BATTERY LOAD TEST,
BATTERY MANAGEMENT, POWER QUALITY, TD MONITOR and SYSTEM POWER.
LOOP CONTROL
Set items related to loop control elements. This menu is only applied when “Fault Indication” type
is set in “MAIN MENU / GLOBAL SETTING / GENERAL / DEVICE / CONTROL TYPE”
menu.
PASSCODE
Set items related to passcode security.
Consists of PASSCODE1, PASSCODE2 and PASSCODE 3.
PASSCODE 1 is applied when changing General Global settings and Group Settings, and
PASSCODE 2 is applied when communication setting is changed. PASSCODE 3 is applied when
clearing or resetting registered data such as event logs, counter logs, energy data, etc.
PLC
Set items related to PLC (Programmable Logic Control) elements.
Consists of LOGIC TIMER, PULSE TIMER, PULSE COUNT, INPUT PORTS and OUTPUT
PORTS.
DEVICE
Set items related to Controller ETMFC610.
Consists of CONTROL TYPE, OPERATION TIME, H/W OPTION, GAS SENSOR, MANUAL
CLOSE, LCD DISPLAY, PANEL SLEEP, TIME ZONE and OTHERS.