EasyManua.ls Logo

Entec ETMFC610 - Type Withstand Tests

Default Icon
372 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Multi-Function Control ETMFC610 http://www.entecene.co.kr
9
EN
HANCED
HNOLOGY
2.2. Type Withstand Tests
Electromagnetic Compatibility Immunity
Electrostatic Discharge Immunity : IEC 61000-4-2 : 2008
Level 3 and 6 contact, 8 air
Radiated electromagnetic field immunity : IEC 61000-4-3 : 2010
10 V/m at 80~1.0 and 1.4~2.7
Electrical Fast Transient Burst Immunity : IEC 61000-4-4 : 2012
2 kV at 5 kHz (Communication Ports)
Surge Immunity : IEC 61000-4-5 : 2017
4 kV line to line
4 kV line to earth
4 kV Comm. ports
Conducted disturbance immunity : IEC 61000-4-6 : 2013
10 V at 150 kHz ~ 80 MHz
Power frequency magnetic field immunity : IEC 61000-4-8 : 2009
100 A/m (Continuous), 1 000 A/m (3s)
Voltage dips, interruption and variation immunity : IEC 61000-4-11 : 2004
Voltage disp immunity test : 0%, 40%, 70%, 80%
Voltage interruptions immunity test : 0%
Voltage variations immunity test : 70 % / 30 cycles
Test for immunity to conducted, common mode disturbances : IEC 61000-4-16 : 2015
30 V (continuous), 300 V (short duration)
Oscillatory wave immunity : IEC 61000-4-18 : 2006
Immunity test for 1 MHz burst ; Comm: 2.5 kV, Differential : 1.0 kV
Immunity test for 100 kHz burst; Comm: 2.5 kV, Differential : 1.0 kV
Emission test : CISPR 11 , Class A

Table of Contents