Multi-Function Control ETMFC610 http://www.entecene.co.kr
Storage Capacity
Stores last 2,000 events.
*. NOTE ) The maximum number of events to be stored can be increased according to user
requests.
9.6. Load & Energy Event
ETMFC610 has the function of periodically recording the load and energy measurement data. The
user can configure the data field to record in the Load & Energy event. For the data field
configuration method, please refer to “9.6.4. Load & Energy Field Configuration” .
Load & Energy events are recorded in three ways: minute average, maximum value per hour, and
maximum value per day. However, if the ‘L&E Record’ setting in the "“MAIN MENU/
GENERAL/ EVENT RECORDER” menu is OFF, Load & Energy events will not be recorded.
9.6.1. Load & Energy/Min. Event
Average load and energy value is recorded every a period set on “GLOBAL SETTING / GENERAL/
EVENT RECORDER / L&P Interval”. Maximum 8,640 values, it’s about 90 days events can be
recorded based on 15 minutes(default) for the event register period.
To check the average value per minute Load & Energy events, please move to “MAIN MENU /
EVENT / LOAD&ENERGY/MIN” .
*. NOTE ) Configuration display for Load&Energy/min events may be revised on user’s request.
To Next Page
Loading...