Multi-Function Control ETMFC610 http://www.entecene.co.kr
10.1.3. PQM Count
This menu displays power quality(PQM) related counter information, it has sub-menu as below.
When a PQM event occurs, the corresponding counter is increased.
10.1.3.1. Interrupt
Move to “MAINTENANCE / PQM / INTERRUPT” to confirm interrupt count.
MAINTENANCE / COUNT / PQM / INTERRUPT
Number of Interruption Detection is displayed.
10.1.3.2. Sag
Move to “MAINTENANCE / COUNT / PQM / SAG” to confirm sag count.
MAINTENANCE / COUNT / PQM / SAG
Number of Sag Detection is displayed.
>1.INTERRUT
2.SAG
3.SWELL
4.HARMONICS
5.CURR UNBALANCE
6.VOLT UNBALANCE
7.UNDER VOLTAGE
8.OVER VOLTAGE
9.UNDER FREQUNCY
TOTAL : 0
PHASE A : 0
PHASE B : 0
PHASE C : 0
MONENTARY : 0
TEMPORARY : 0
SUSSTAINED : 0
TOTAL : 0
PHASE A : 0
PHASE B : 0
PHASE C : 0
INSTANT : 0
MONENTARY : 0
TEMPORARY : 0
To Next Page
Loading...