Entec ETMFC610 - Page 20

Multi-Function Control ETMFC610 http://www.entecene.co.kr
10
EN
HANCED
TEC
HNOLOGY
Environmental
 Cold : IEC 60068-2-1 :2007
 Test Ad : 16 hours at -40℃
 Dry Heat : IEC 60068-2-2 :2007
 Test Ad : 16 hours at +85℃
 Damp heat, steady state : IEC 60068-2-3 : 1969
 Severity Level : 40℃, 4day
 Relative Humidity : 93%
 Damp heat, Cyclic : IEC 60068-2-30 : 2005
 Severity Level : 25℃ to 55℃, 2cycles
 Relative Humidity : 95%
 Vibration : IEC 60255-21-1 : 1988
 Shock and bump : IEC 60255-21-2 : 1988
 Seismic : IEC 60255-21-3 : 1993
Safety
 Dielectric Strength : IEC 60255-27 : 2013
 2000 Vac on Control inputs, control outputs, and analog inputs, communication for
1minute
 Impulse : IEC 60255-27 : 2013, 0.5 J, 5 kV, 1.2/50 ㎲
 Insulation resistance : IEC 60255-27 : 2013, 100 ㏁ at 500 V d.c.