Multi-Function Control ETMFC610 http://www.entecene.co.kr
NEGATIVE REAL POWER - C: Indicates the Demand active power of present phase C,
Demand active power maximum value of phase C and the time that have measured the
maximum value for reverse direction.
NEGATIVE REAL POWER – 3P: Indicates the Demand active value of present three-
phase, Demand active power maximum value of three-phase and the time that have measured
the maximum value for reverse direction.
POSITIVE REACTIVE POWER - A: Indicates the Demand reactive power of present
phase A, Demand active power maximum value of phase A and the time that have measured
the maximum value for forward direction.
POSITIVE REACTIVE POWER - B: Indicates the Demand reactive power of present
phase B, Demand active power maximum value of phase B and the time that have measured
the maximum value for forward direction.
POSITIVE REACTIVE POWER - C: Indicates the Demand reactive power of present
phase C, Demand reactive power maximum value of phase C and the time that have measured
the maximum value for forward direction.
POSITIVE REACTIVE POWER – 3P: Indicates the Demand reactive power of present
three-phase, Demand reactive power maximum value of three-phase and the time that have
measured the maximum value for forward direction.
NEGATIVE REACTIVE POWER - A: Indicates the Demand reactive power of present
phase A, Demand active power maximum value of phase A and the time that have measured
the maximum value for reverse direction.
NEGATIVE REACTIVE POWER - B: Indicates the Demand reactive power of present
phase B, Demand active power maximum value of phase B and the time that have measured
the maximum value for reverse direction.
NEGATIVE REACTIVE POWER - C: Indicates the Demand reactive power of present
phase C, Demand reactive power maximum value of phase C and the time that have measured
the maximum value for reverse direction.
NEGATIVE REACTIVE POWER – 3P: Indicates the Demand reactive power of present
three-phase, Demand reactive power maximum value of three-phase and the time that have
measured the maximum value for reverse direction.
*. NOTE ) The above Max. Demand current and power of each phase and three-phase can be reset
by “MAIN MENU/ MAINTENANCE/ DATA RESET/ MAX DEMAND” menu.
To Next Page
Loading...