Entec EVRC2A-N6-NT - 9 Status; OPTO Inputs; Relay Outputs

RECLOSER CONTROL EVRC2A-N6,NT http://www.entecene.co.kr
222
ENHANCED TECHNOLOGY
9. STATUS
This menu shows the current status of EVRC2A like below
y OPTO INPUTS
y RELAY OUTPUTS
y CLOCK
y CONTROL TYPE
9.1. OPTO Inputs
Move to “MAIN MENU / STATUS / OPTO INPUTS” to see external input port status..
STATUS / OPTO INPUTS
Display 8 input port statuses. They are indicated as “OPEN” or
“CLOSE” depending on the input signal status.
OPEN : Shows External Input is de-asserted,
CLOSE : Shows External Input is asserted.
Use [▲] [▼] button to see all input port statuses
9.2. Relay Outputs
Move to “MAIN MENU / STATUS / RELAY OUTPUTS” to see external output port status.
STATUS / OPTO INPUTS
Display 8 output port statuses. They are indicated as “OPEN” or
“CLOSE” depending on the output signal status.
OPEN : Shows External Output is de-asserted,
CLOSE : Shows External Output is asserted.
Use [▲] [▼] button to see all output port statuses
[OPTO INPUTS]
Input 1: OPEN
Input 2: CLOSE
Input 3: OPEN
Input 4: OPEN
Input 5: OPEN
Input 6: OPEN
Input 7: OPEN
Input 8: CLOSE
Door St: CLOSE
[RELAY OUTPUTS]
Output 1: OPEN
Output 2: CLOSE
Output 3: OPEN
Output 4: OPEN
Output 5: OPEN
Output 6: OPEN
Output 7: OPEN
Output 8: CLOSE