Entec EVRC2A-N6-NT - Page 91

RECLOSER CONTROL EVRC2A-N6,NT http://www.entecene.co.kr
81
ENHANCED TECHNOLOGY
RELAY SETUP / TIME SET&DIS TYPE / GMT Min*
Range
0~59
Default
0
Step
1
Set the minute difference between local time and GMT.
NOTE
Korea Local time is 9 hour faster than UTC time, set it as follows (+9:00);
Sing : +, Hour : 9, Min : 0
NOTE
If the setting values associated with GMT are set up incorrectly, the problems can be happened
as follows.
- If the "Time Syn’ Ref" is set to be GMT, the time of the internal clock in EVRC2A can
be changed incorrectly at time synchronization.
- If the time type of the DNP communication event is set to be GMT, the time of event
transmitted is not correct.
NOTE :
The above set values marked with * are indicated from Ver 6.15 of EVRCA.
RELAY SETUP / TIME SET&DIS TYPE / Disp’ Type
Range
YMD, MDY
Default
YMD
Step
~
YMD : it displays in turn Year / Month / Date
MDY : it displays in turn Month / Date / Year
RELAY SETUP / TIME SET&DIS TYPE / Time Syn’ Ref
Range
LOCAL, GMT
Default
GMT
Step
~
Set Reference Time Type when time need in a device is synchronized
with GPS(or IRIG).
NOTE :
The setting is supported from Ver 7.04 of EVRC2A_NT.
[TIME SET&DIS’TYPE]
>GMT Min : 0
>Disp’ Type: YMD
>Time Syn’ Ref: GMT
[TIME SET&DIS’TYPE]
>GMT Min : 0
>Disp’ Type: YMD
>Time Syn’ Ref: GMT
[TIME SET&DIS’TYPE]
>GMT Hour: 0
>GMT Min : 0
>Disp’ Type: YMD