EasyManuals Logo

Enterasys Matrix-V V2H124-24 User Manual

Enterasys Matrix-V V2H124-24
498 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Configuring the Switch
3-110
3
CLI – This example shows statistics for port 13.
Cabletron Discovery Protocol
The Cabletron Discovery Protocol (CDP) protocol enables a switch to discover the
topology of other CDP-aware devices in the network. The protocol enables each
switch to determine if other CDP-aware switches are adjacent to it. Note that two
switches are adjacent if and only if the following two requirements are satisfied:
1. There exists a Spanning Tree path between them.
2. There exists no other CDP-aware device between the two switches on that
Spanning Tree path.
Globally Configuring CDP
Use the CDP Global Settings screen to configure global settings.
Command Attributes
• Status – Sets the global switch CDP action.
- Enabled – Enables CDP for the switch. Ports will process CDP packets
depending on the port CDP setting.
- Disabled – Disables CDP on the switch. The switch does not send CDP packets
from any port, regardless of the port CDP setting. Any CDP packets received are
flooded to all other ports.
Console#show interfaces counters ethernet 1/13 4-159
Ethernet 1/13
Iftable stats:
Octets input: 868453, Octets output: 3492122
Unicast input: 7315, Unitcast output: 6658
Discard input: 0, Discard output: 0
Error input: 0, Error output: 0
Unknown protos input: 0, QLen output: 0
Extended iftable stats:
Multi-cast input: 0, Multi-cast output: 17027
Broadcast input: 231, Broadcast output: 7
Ether-like stats:
Alignment errors: 0, FCS errors: 0
Single Collision frames: 0, Multiple collision frames: 0
SQE Test errors: 0, Deferred transmissions: 0
Late collisions: 0, Excessive collisions: 0
Internal mac transmit errors: 0, Internal mac receive errors: 0
Frame too longs: 0, Carrier sense errors: 0
Symbol errors: 0
RMON stats:
Drop events: 0, Octets: 4422579, Packets: 31552
Broadcast pkts: 238, Multi-cast pkts: 17033
Undersize pkts: 0, Oversize pkts: 0
Fragments: 0, Jabbers: 0
CRC align errors: 0, Collisions: 0
Packet size <= 64 octets: 25568, Packet size 65 to 127 octets: 1616
Packet size 128 to 255 octets: 1249, Packet size 256 to 511 octets: 1449
Packet size 512 to 1023 octets: 802, Packet size 1024 to 1518 octets: 871

Table of Contents

Other manuals for Enterasys Matrix-V V2H124-24

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Enterasys Matrix-V V2H124-24 and is the answer not in the manual?

Enterasys Matrix-V V2H124-24 Specifications

General IconGeneral
BrandEnterasys
ModelMatrix-V V2H124-24
CategorySwitch
LanguageEnglish

Related product manuals