Configuring the Switch
3-122
3
Web – Click Address Table, Dynamic Addresses. Specify the search type
(i.e., Interface, MAC Address, or VLAN), the method of sorting the displayed
addresses, then click Query.
Figure 3-76. Displaying the MAC Dynamic Address Table
CLI – This example also displays the address table entries for port 11.
Changing the Aging Time
You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables or disables the aging time.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Console#show mac-address-table ethernet 1/11 4-176
Interface Mac Address Vlan Type
--------- ----------------- ---------------------
Eth 1/11 00-30-F1-B0-E7-A 1 Learned
Console#
To Next Page
Loading...
Need help?
General