Command Line Interface
4-216
4
Example
show queue cos-map
Use this command to show the class of service priority map.
Syntax
show queue cos-map [interface]
interface
- ethernet unit/port
- unit - This is device 1.
- port - Port number.
- port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 4
2 16
3 64
Console#
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
To Next Page
Loading...
Need help?
General