Enterasys Matrix-V V2H124-24 User Manual

Command Line Interface
4-94
4
aaa accounting
This command enables RADIUS accounting of requested services for billing or
security purposes. Use the no form to disable the accounting service.
Syntax
aaa accounting [[dot1x | exec | update] default | server-name | periodic
[start-stop group radius | server-name]]
no radius-server
• dot1x - Runs accounting for dot1x service request.
•exec - Runs accounting request for Exec service request.
• update - Enables periodic interim accounting records to be sent to the
accounting server.
- default - Specifies the default accounting list. The default list contains dot1x
and Exec accounting RADIUS defaults.
- server-name - Specifies the name of a server. (1-7 characters)
- periodic - Sends a periodic request for an update. (Default: 0;
Range:1~2147483647 minutes)
• start-stop - Automatically records an authentication starting point and
stopping point.
• group - Specifies the server user group.
- radius - Specifies all Radius hosts.
Default Setting
None
Command Mode
Global Configuration
Example
accounting
This command applies the accounting method list to an interface. Use the no form to
remove accounting from the interface.
Syntax
accounting [dot1x default | name] | [exec list-name]
no accounting dot1x
• dot1x - Configures a dot1x service request.
- default - Specifies the default accounting list that contains dot1x and exec
service requests.
- name - Specifies a method name.
• exec - Applies a method to a selected port.
- list-name - Specifies an accounting list with this name.
Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English