Enterasys Matrix-V V2H124-24 - Spanning Tree Commands; Table 4-58. Spanning Tree Commands

Command Line Interface
4-178
4
Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Table 4-58. Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-179
spanning-tree mode Configures STP or RSTP mode GC 4-179
spanning-tree forward-time Configures the spanning tree bridge forward time GC 4-181
spanning-tree hello-time Configures the spanning tree bridge hello time GC 4-181
spanning-tree max-age Configures the spanning tree bridge maximum age GC 4-182
spanning-tree priority Configures the spanning tree bridge priority GC 4-183
spanning-tree default priority Changes the default spanning-tree priority format from
802.1t to 802.1D format.
GC 4-183
spanning-tree pathcost
method
Configures the path cost method for RSTP GC 4-184
spanning-tree
transmission-limit
Configures the transmission limit for RSTP GC 4-184
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-185
spanning-tree backup-root Adjusts the bridge priority in an attempt to take over as the
root bridge if it loses contact with the original root device
GC 4-193
mst vlan Adds VLANs to a spanning tree instance MST 4-185
mst priority Configures the priority of a spanning tree instance MST 4-186
name Configures the name for the multiple spanning tree MST 4-187
revision Configures the revision number for the multiple spanning
tree
MST 4-187
max-hops Configures the maximum number of hops allowed in the
region before a BPDU is discarded
MST 4-188
spanning-tree
spanning-disabled
Disables spanning tree for an interface IC 4-185
spanning-tree cost Configures the spanning tree path cost of an interface IC 4-189
spanning-tree port-priority Configures the spanning tree priority of an interface IC 4-190
spanning-tree edge-port Enables fast forwarding for edge ports IC 4-191
spanning-tree portfast Sets an interface to fast forwarding IC 4-191
spanning-tree link-type Configures the link type for RSTP/MSTP IC 4-192
spanning-tree mst cost Configures the path cost of an instance in the MST IC 4-194
spanning-tree mst
port-priority
Configures the priority of an instance in the MST IC 4-194
spanning-tree
protocol-migration
Re-checks the appropriate BPDU format PE 4-195