Enterasys Matrix-V V2H124-24

Authentication Commands
4-95
4
Default Setting
None
Command Mode
Interface Configuration
Example
show accounting
This command displays the current accounting settings per function and per port.
Syntax
show accounting [[dot1x | statistics [username | interface]] | exec |
statistics]
• dot1x - Displays dot1x accounting information.
•exec - Displays exec accounting records.
• statistics - Displays accounting records.
• username - Displays accounting records for a specifiable username.
• interface - Specifies an interface.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#interface ethernet 1/24
Console(config-if)#accounting dot1x default
Console(config-if)#
Console#show accounting
Accounting type: dot1x
Method list: default
Group list: radius
Interface: eth 1/24
Accounting type: Exec
Method list: default
Group list: radius
Interface:
Console#