Configuring the Switch
3-12
3
CLI – Use the following command to display version information.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast
Filtering, Traffic Classes, and Virtual LANs. You can access these extensions to
display default settings for the key variables, or to configure the global setting for
GARP VLAN Registration Protocol (GVRP).
Field Attributes
• Extended Multicast Filtering Services – This switch does not support the filtering
of individual multicast addresses based on GMRP (GARP Multicast Registration
Protocol).
• Traffic Classes – This switch provides mapping of user priorities to multiple traffic
classes. (Refer to “Class of Service Configuration” on page 3-156.)
• Static Entry Individual Port – This switch allows static filtering for unicast and
multicast addresses. (Refer to “Setting Static Addresses” on page 3-120.)
• VLAN Learning – This switch uses Independent VLAN Learning (IVL), where each
port maintains its own filtering database.
• Configurable PVID Tagging – This switch allows you to override the default Port
VLAN ID (PVID used in frame tags) and egress status (VLAN-Tagged or
Untagged) on each port. (Refer to “VLAN Configuration” on page 3-144.)
Console#show version 4-64
Unit1
Serial number: 033840352141
Service tag: 0000000
Hardware version: R02
Module A type: Stacking Module
Module B type: Combo 1000BaseT SFP
Number of ports: 26
Main power status: up
Redundant power status: not present
Agent (master)
Unit ID: 1
Loader version: 8.8.1.1
Boot ROM version: 9.9.9.9
Operation code version: 2.3.3.0
Unit2
Serial number: 033840302141
Service tag: 0000000
Hardware version: R02
Module A type: Stacking Module
Module B type: not present
Number of ports: 26
Main power status: up
Redundant power status: not present
Agent (slave)
Unit ID: 2
Loader version: 8.8.1.1
Boot ROM version: 9.9.9.9
Operation code version: 2.3.3.0
Console#
To Next Page
Loading...
Need help?
General