Enterasys Matrix-V V2H124-24

General Commands
4-23
4
exit
Use this command to return to the previous configuration mode or exit the
configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
quit
Use this command to exit the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username:
Console#quit
Press ENTER to start session
User Access Verification
Username: