Enterasys Matrix-V V2H124-24 User Manual

Spanning Tree Commands
4-197
4
• For a description of the items displayed under “Spanning-tree information,”
see “Configuring Global Settings” on
page 3-127. For a description of the
items displayed for specific interfaces, see “Displaying Interface Settings” on
page 3-131.
Example
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode: MSTP
Spanning tree enabled/disabled: enabled
Spanning tree priority format: 801.1t
Spanning tree backup root: disabled
Instance: 0
VLANs configuration: 1-4093
Priority: 32768
Bridge Hello Time (sec.): 2
Bridge Max Age (sec.): 20
Bridge Forward Delay (sec.): 15
Root Hello Time (sec.): 2
Root Max Age (sec.): 20
Root Forward Delay (sec.): 15
Max hops: 20
Remaining hops: 20
Designated Root: 32768.0.0001F4475BA0
Current root port: 0
Current root cost: 0
CIST path cost: 0
Number of topology changes: 0
Last topology changes time (sec.):2108
Transmission limit: 6
Path Cost Method: long
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status: enabled
Role: disable
State: discarding
External path cost: 200000
Internal path cost: 200000
Priority: 128
Designated cost: 0
Designated port : 128.1
Designated root: 32768.0.0001F4475BA0
Designated bridge: 32768.0.0001F4475BA0
Fast forwarding: enabled
Forward transitions: 0
Admin edge port: enabled
Oper edge port: enabled
Admin Link type: auto
Oper Link type: point-to-point
Spanning Tree Status: enabled
.
.
Console#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English