Configuring the Switch
3-4
3
Log 3-26
Logs Stores and displays error messages 3-26
System Logs Sends error messages to a logging process 3-28
Remote Logs Configures the logging of messages to a remote logging process 3-28
SMTP Sends an SMTP client message to a participating server 3-30
Reset Restarts the switch 3-32
SNTP 3-33
SNTP Configuration Configures SNTP client settings, including broadcast mode or a
specified list of servers
3-33
Clock Time Zone Sets the local time zone for the system clock 3-33
SNMP 3-35
Configuration Configures community strings and related trap functions 3-37
Agent Status Allows SNMP to be enabled or disabled 3-38
SNMPv3 3-39
Engine ID Sets the SNMP v3 engine ID 3-39
Users Configures SNMP v3 users 3-40
Groups Configures SNMP v3 groups 3-42
Views Configures SNMP v3 views 3-44
Security 3-46
User Accounts Configures user names and passwords 3-46
Authentication Settings Configures authentication sequence, RADIUS and TACACS 3-48
AAA
Accounting Settings Configures accounting of requested services for billing or security
purpose
3-51
Radius Group Settings Configures the IP address of the RADIUS group server 3-52
Update Periodic Sets the time within which the server updates user information 3-53
802.1x Port Settings Applies specified accounting methods to ports. 3-54
Exec Settings Specifies console or Telnet authentication 3-55
Summary Displays accounting information and statistics. 3-55
HTTPS Settings Configures secure HTTP settings 3-56
SSH 3-58
Settings Configures Secure Shell server settings 3-62
Host-Key Settings Generates the host key pair (public and private) 3-60
Table 3-2. Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General