Epson AcuLaser MX14 - Page 214

Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
Off
Turns off the volume of the line monitor.
Min
Sets the volume of the line monitor.
Middle*
Max
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Turns off the volume of the ring tone.
Min
Sets the volume of the ring tone.
Middle
Max*
Line Type
Purpose:
To select the line type.
Values:
PSTN*
Sets the line type to PSTN.
PBX
Sets the line type to PBX.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 214