Epson AcuLaser MX14 - Page 219

Values:
Off*
Does not set a prefix dial number.
On
Sets a prefix dial number.
Prefix Dial Num
Purpose:
To set a prefix dial number of up to five digits. This number dials before any auto dial number is
started. It is useful for accessing the Private Automatic Branch Exchange (PABX).
Discard Size
Purpose:
To set whether to discard text or images at the bottom of a fax page when the entire page does not fit
onto the output paper.
Values:
Off*
Prints any excess at the bottom of a fax page without discarding it.
On
Discards any excess at the bottom of a fax page.
Auto Reduction
Automatically reduces a fax page to fit it onto the output paper.
ECM
Purpose:
To set whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines
must also support the ECM.
Values:
Off
Disable the ECM.
On*
Enables the ECM.
Extel Hook Thresh
Purpose:
To select the external telephone hook detection threshold for the condition in which a telephone line
isnot being used.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 219