Epson AcuLaser MX14 - Page 220

Values:
Lower
Sets the external telephone hook detection threshold to Lower.
Normal*
Sets the external telephone hook detection threshold to Normal.
Higher
Sets the external telephone hook detection threshold to Higher.
Modem Speed
Purpose:
To specify the fax modem speed when a fax transmission or reception error occurs.
Values:
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
33.6 Kbps*
Fax Activity
Purpose:
To set whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Values:
Auto Print*
Automatically prints a fax activity report after every 50 incoming and outgoing
fax communications.
No Auto Print
Does not automatically print a fax activity report.
Fax Transmit
Purpose:
To set whether to print a transmission report after every fax transmission or only when an error
occurs.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 220