Epson AcuLaser MX14 - Page 223

Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The job is cancelled
if it times out.
Values:
Off
Disables the fault time-out.
On 60sec*
Specifies the time taken by the printer before it cancels for jobs that
stop abnormally.
3-300sec
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job
is cancelled if it times out.
Values:
Off
Disables the job time-out.
On 30sec*
Specifies the amount of time that the printer waits for data to arrive
from the computer.
5-300sec
Clock Settings
Purpose:
To set the date and time, and regional time zone of the printer.
Values:
Set Date
Specifies the current date.
Set Time
Specifies the current time.
Date Format yy/mm/dd
Specifies the date format.
mm/dd/yy
dd/mm/yy*
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 223