Time Format 12H*
Specifies the time format.
24H
Time Zone
Specifies the time zone.
Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
Panel Select Tone Off*
Does not emit a tone when the operator panel input is correct.
Low
Emits a tone at the specified volume when the operator panel input is
correct.
Medium
High
Panel Alert Tone Off*
Does not emit a tone when the operator panel input is incorrect.
Low
Emits a tone at the specified volume when the operator panel input is
incorrect.
Medium
High
Auto Clear Alert Off*
Does not emit a tone before the printer performs auto clear.
Low
Emits a tone at the specified volume five seconds before the printer
performs auto clear.
Medium
High
Job Tone Off
Does not emit a tone when a job is complete.
Low
Emits a tone at the specified volume when a job is complete.
Medium*
High
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 224
To Next Page
Loading...
