Epson AcuLaser MX14 - Page 225

Alert Tone Off
Does not emit a tone when a problem occurs.
Low
Emits a tone at the specified volume when a problem occurs.
Medium*
High
Out of Paper Off
Does not emit a tone when the printer runs out of paper.
Low
Emits a tone at the specified volume when the printer runs out of
paper.
Medium*
High
All Tones Off
Disables all the alert tones.
Low
Sets the volume of all the alert tones at once.
Medium
High
mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)*
Specifies the default measurement unit.
Inches (")
Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
Does not show the alert message when the toner is low.
On*
Shows the alert message when the toner is low.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 225