Epson AcuLaser MX14 - Page 241

Softer
Makes the scanned image softer than the original.
Softest
Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
Off
Does not suppress the background.
On*
Suppresses the background of the original to enhance text on the scanned
image.
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
2 mm*/0.1 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
2 mm*/0.1 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Margin Middle
Purpose:
To specify the value of the middle margin.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 241