Epson AcuLaser MX14 - Page 242

Values:
0 mm*/0.0 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
TIFF File Format
Purpose:
To specify the TIFF file format.
Values:
TIFF V6*
TTN2
Image Compression
Purpose:
To specify the image compression level.
Values:
Higher
Sets the image compression level to Higher.
Normal*
Sets the image compression level to Normal.
Lower
Sets the image compression level to Lower.
Max E-Mail Size (Epson AcuLaser MX14NF Only)
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes.
The default is 2048 K bytes.
Fax Defaults (Epson AcuLaser MX14NF Only)
Use the Fax Defaults menus to configure a variety of fax features.
Note:
❏ The Fax service cannot be used unless you set up a region code under Region. If Region is not set up,
a message Set The Region Code appears on the LCD panel.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 242