C8-B/C12-B Service Manual Maintenance Information Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 1-9 Rev.1
How to Edit the Maintenance Information
The configured maintenance information can be edited in the EPSON RC+ 7.0 Ver.7.2.x or later.
When replaced the parts subject to maintenance (Motors, Reduction Gears, and Timing Belts), please edit the Maintenance Information.
1. Select the EPSON RC+ 7.0 menu- [Tools] - [Maintenance] to display the [Controller Tools] dialog box.
2. To edit the maintenance information, display the [Maintenance] dialog box.
3. Select “General” or specify the axis from the tree to display information of the target parts.
To Next Page
Loading...
