Epson C8-B - Page 230

C8-B/C12-B Service Manual Maintenance Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 2-188 Rev.1
Installing the Motor Unit
Install the J5 Motor unit.
1. Insert the J5 Motor unit inside Arm4.
POINT
Insert into the arm from the bottom of the motor.
2. Set the Timing Belt around pulley 1 and pulley 2, and temporarily secure the J5 Motor
unit.
POINT
First place the belt on pulley 2.
1
S01: 2-M4x15
and washer
A
J5 Timing Belt
J5 Motor unit
Pulley 2
Pulley 1
J5 Motor unit
Arm4
J5 Motor unit
Arm4
5
3
1
4
6
6