Epson C8-B - Page 345

C8-B/C12-B Service Manual Maintenance Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 2-303 Rev.1
Turn OFF the Controller.
Remove the Arm3 cover.
Disconnect the connector (LED) for the LED lamp.
POINT
The connector (LED) for the LED lamp is under the Arm3 cover when it is open.
Remove the LED lamp.
POINT
Turn the plastic nut securing the LED lamp in Arm3 counterclockwise.
1
2
3
4
LED lamp
Plastic nut
ト
3
2
4
Replacing the LED Lamp