Epson C8-B - Page 86

C8-B/C12-B Service Manual Maintenance Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 2-44 Rev.1
Loosen the screws securing the J2 Motor unit.
WARNING
Loosening the screws while Arm2 is not tilted will result in the belt coming off and Arm2
falling, which is very dangerous. Prior to loosening the J2 Motor unit screws, ensure that
work in step  is performed and that Arm2 is tilted.
Remove the J2 Timing Belt.
POINT
First remove the belt from pulley 1.
6
A
S01: 3-M5x25
and washer
J2 Motor unit
7
J2 Motor unit
Pulley 2
Pulley 1
Timing Belt
2
4
6
5
7
Removing the Timing Belt