5. Press the LF/FF
D button to move the top-of-form position up
on the page, or press the Load/Eject
U button to move the
top-of-form position down on the page.
c
Caution:
Never use the knob to adjust the top-of-form position; this
may damage the printer or cause it to lose the top-of-form
position.
Note:
R The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the
printer beeps and stops moving the paper.
R When the paper reaches the default top-of-form position,
the printer also beeps and stops moving the paper briefly.
You can use the default setting as a reference point when
adjusting the top-of-form position.
plastic ribbon
cover
3-6anew
L
Sun-G+ Rev.C
A5 size Chapter 2
97/11/17 pass 3
2-38 Printing on Continuous Paper
To Next Page
Loading...
