Epson Stylus Color 1520 Service Manual

Product Description
Rev. A
1-11
1.2.7 Adjust Lever
The adjust lever , located at the left and upper side of the printer , is used to adjust the gap between the
paper and platen. The adjust lever must be set to the proper position the paper type in order to prevent
the paper from smudging.
Paper
Type
Lever
Position
Platen Gap Adjustment
Value
Cut sheet
Transparency
Continuous paper
Index card
Far side (0) 0 mm
Envelopes Near side (+) + 0.7 mm
Table 1-12. Adjust Lever Position
0
+
Adjust lever
Figure 1-6. Adjust Lever Settings

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office