Epson Stylus Color 740 Service Manual

EPSON Stylus COLOR 440, 640, and 740 Appendix
163
76H 00H 00H
77H 00H 00H
78H 00H 00H
79H 00H 00H
7AH 00H 00H
7BH 00H 00H
7CH 00H 00H
7DH 00H 00H
7EH 00H 00H
7FH 00H 00H
*1:
Set at the factory.
*2:
Set when the EEPROM is initialized from the control panel.
*3: BUSY signal delay time from the falling edge of an /STB signal.
(Fast: maximum 1MB/s, Slow: maximum 600KB/s)
*4: Select IEEE-1284 transfer mode (ECP or Nibble).
*5: Enable or disable reverse transfer. (When disabled, ignore /SLIN signal.)
Table A-26. Stylus COLOR 740 EEPROM Address Map (continued)
Address Explanation Setting
QPIT
Settings
Factory
Settings

Epson Stylus Color 740 Specifications

General

Brand	Epson
Model	Stylus Color 740
Category	Printer
Language	English