Epson Stylus Color 740 Service Manual

EPSON Stylus COLOR 440, 640, and 740 Chapter 1 Product Description
15
1.2.5 Environmental Conditions

Temperature

Operatin
g
: 50 to 95 °F
(
10 to 35
°
C
)
(
See Fi
g
ure 1-8.
)

Non-operatin
g
:-4 °F to 140 °F
(
-20 to 60
°
C
)
in shipment
container
NOTE: 1 month at 104 °F (40 °C) and 120 hours at 140 °F (60 °C)

Humidit
y

Operatin
g
: 20% to 80% RH without condensation
(
See Fi
g
ure 1-8.
)

Non-operatin
g
: 5% to 85% RH without condensation and in
shippin
g
container
Figure 1-8. Temperature / Humidity of Range

Resistance to shock

Operatin
g
: 1 G, within 1 ms
X, Y, and Z directions

Non-operatin
g
: 2 G, within 2 ms
X, Y, and Z directions, in shipment container

Resistance to vibration

Operatin
g
:0.15 G

Non-operatin
g
:0.50 G
NOTES: 1. When the printer is not in operation, make sure that the
printhead is capped.
2. During transport, make sure the printhead is capped and
the ink cartridges are installed.
3. If you notice that the printhead is not capped while power
is off, turn power on (ink cartridges should be installed).
After the printhead has moved to the capping position,
turn power off again.
4. Ink freezes under 27 °F (-3 °C), but thaws and becomes
usable again after 3 hours at 77 °F (25 °C).
Humidity
(% R H )
80%
55%
20%
10 27
35
50
( C
)
80 95
( F )
G uaranteed
A re a

Epson Stylus Color 740 Specifications

General

Brand	Epson
Model	Stylus Color 740
Category	Printer
Language	English