EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050 Revision A
PRODUCT DESCRIPTION Memory Card Print 29
1.5 Memory Card Print
1.5.1 Basic Specifications
1.5.1.1 File System
DCF Version 1.0 or 2.0 is the file system that can be used with this unit's stand-alone
printing functions. Operation is not guaranteed when any other file system is used.
The file system used by the card reader function depends on the host's specifications.
For a detailed description of the DCF specifications, see “Design Rule for Camera File
System Standard, DCF Version 2.0, JEIDA-CP-3461”.
1.5.1.2 Media Format
Media must be formatted according to the DCF Version 1.0 or 2.0 standard.
DOS FAT fo
rmats (FAT12, FAT16, FAT32*
1
) and single partition (basic
partition)
Note *1: Only the card to which use is permitted by each memory card standard
1.5.1.3 File Formats
The file formats supported by this unit are described below.
JPEG files
(*.JPG)
These are photo data files that comply with the Exif Version 2.21. (Extif version
1.0/2.0/2.1/2.2/2.21)
Camera sp
ecification files (*.MRK)
These are definition files used when in camera specification mode. An
“AUTOPRINT.MRK” file whose full path name is no longer than 32 characters is
valid.
PR
INT Image Framer (P.I.F.) definition file (*.USD)
(Stylus CX5900/CX6000/DX6000/DX6050 only)
File to define the layout in accordance with the PRINT Image Framer
specifications. Files only in the “
¥\EPUDL\¥” directory are available. Compatible
with Print Image Framer Rev.2.1.
1.5.1.4 Valid Image Size
The maximum image size handled by this unit is:
Horizontal:
80 X 9200 (pixels)
Vertical:
80 Y 9200 (pixels)
1.5.1.5 Maximum Number of Photo Data Files
This unit can handle up to 999 photo data files. If the amount of photo data to be
recorded exceeds the capacity of one memory card, this unit uses file sorting rules to
sort the photo data into valid photo data in frames numbered from 1 to 999. Although it
is possible to print photo data files with frame numbers over 999 that have been
specified for printing by camera specification files, the maximum number of frames
that can be specified is 999 frames.
If you insert a memory card that contains over 999 photo data files, only files up to 999
will be printed by the “Print All” or “Print index sheet” functions.
1.5.1.6 Thumbnail Image Data
This unit handles thumbnail image data in the DCF Version 1.0 or 2.0 format
(Exif format, 160 x 120 pixels).
During this unit's Index sheet and memory card printing modes, the layout is 80
thumbnails per sheet (when using plain paper or special paper in high-speed print
mode).
C H E C K
P O I N T
However, any file that is saved in the following directories or their
sub-directories cannot be included as files to be printed.
Directories
containing system properties or hidden properties
Directories
that contain any double-byte characters in the
directory name
“R
ECYCLED”:Windows directory for deleted files
“PRE
VIEW”: Directories containing CASIO's DSC
thumbnail images
“SCENE”:
Directories containing data for CASIO's DSC
Best Shot function
“M
SSONY”: Directories containing SONY's DSC e-mail
image data, voice memos, video files, or non-
compressed images
“DCIM¥ALBUM¥IMAGE”: Directories containing CASIO's
DSC album data save directory.
To Next Page
Loading...
Need help?
General