EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050 Revision A
PRODUCT DESCRIPTION Control Panel 55
1.9.4 Operations
For operations of the Stylus CX4900/CX4905/CX5000/DX5000/DX5050 refer to Table 1-53 on page 55
For operations of the Stylus CX5900/CX6000/DX6000/DX6050 refer to Table 1-54 on page 57
1.9.4.1 Stand-alone Copy / Memory Card Print (Stylus CX4900/CX4905/CX5000/DX5000/DX5050)
The functions of this unit caused by each button in stand-alone copy mode or memory card print mode are described in the following table.
Table 1-53. Operations for Stylus CX4900/CX4905/CX5000/DX5000/DX5050
Button
Function
Stand-alone Copy Memory Card Print
Power Button
• Turn on or off this unit.
Ink Button
• Start or advance ink cartridge (I/C) exchanging procedure.
Ca
se
[All i
nks are enough.] Move carriage (CR) to I/C exchange position.
[
Ink low, Replace ink, Without I/C error] Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan, Magenta, Yellow,
Black.
[CR is in some
color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
[CR is in I/C
exchange position.] Move CR to standby position.
• Invalid while printing, scanning, cleaning head, stopping printing o
r copying, exchanging I/C, or in error status except for ink out error, paper out error, memory card error, index sheet error, PG error.
Ink Button
(H
olding over 3
sec.)
• Start cleaning head procedure.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, memory card error, index sheet error, PG error.
Memory Card
Button
• Make transition from “Stand-alone copy” mode to “Memory card print” mode and select and
light “Print Index Sheet”, or “Print All / DPOF” if DPOF file exists in the card.
• Turn off both 7 Segment LED and “Fit to Page” LED.
• Select “Plain Paper” and “Letter (or A4)”
• Change to next “Memory card print” function.
Case
[Pr
int Index Sheet] Change to “Print From Index Sheet”, and change paper type and
paper size to the one last set in “Print From Index Sheet” or “Print
All / DPOF”.
[
Print From Index Sheet] Change to “Print All / DPOF”.
[
Print All / DPOF] Change to “Print Index Sheet”, and change paper type and paper
size to “Plain Paper” and “Letter (or A4)”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for memory card error, index sheet error, PG error.
Copy Button
• Set number of copies incrementally and indicate it on 7 Segment LED.
Ca
se
[1
to 8] Add 1 and the number becomes 2 to 9.
[
9] Indicate “-”, which means 100 copies.
[
-] Reset to “1”.
• Invalid while printing, scanning, cleaning head, stopping pr
inting or copying, exchanging I/C, or
in error status.
• Number decreases one by one after 1 copy is finished and return to the beginning number when
all copies are finished. When “-” is indicated, number of copies decreases internally but no
change can be seen on 7 Segment LED.
• Make transition from “Memory card print” mode to “Stand-alone copy” mode and set number of
copies to “1”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or
in error status except for memory card error, index sheet error, PG error.
To Next Page
Loading...
Need help?
General