About This Manual
This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included
herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.
Manual Configuration
This manual consists of six chapters and Appendix.
CHAPTER 1. PRODUCT DESCRIPTIONS
Provi
des a general overview and specifications of the product.
CHAPTER 2. OPERATING PRINCIPLES
Describes
the theory of electrical and mechanical operations of the
product.
CHAPTER 3. TROUBLESHOOTING
Descri
bes the step-by-step procedures for the troubleshooting.
CHAPTER 4. DISASSEMBLY / ASSEMBLY
Describes the
step-by-step procedures for disassembling and
assembling the product.
CHAPTER 5. ADJUSTMENT
Provi
des Epson-approved methods for adjustment.
CHAPTER 6. MAINTENANCE
Provi
des preventive maintenance procedures and the lists of Epson-
approved lubricants and adhesives required for servicing the product.
CHAPTER 7. APPENDIX
Provi
des the following additional information for reference:
• Connector Summary
• Exploded Diagram
• Parts List
• Electrical Circuits
Symbols Used in this Manual
Various symbols are used throughout this manual either to provide additional
information on a specific topic or to warn of possible danger present during a
procedure or an action. Be aware of all symbols when they are used, and always read
NOTE, CAUTION, or WARNING messages.
Indicates an operating or maintenance procedure,
practice or condition
that, if not strictly observed, could result in injury or loss of life.
Indicates an operating or maintenance procedure,
practice, or condition
that, if not strictly observed, could result in damage to, or destruction of,
equipment.
May indicate an operati
ng or maintenance procedure, practice or
condition that is necessary to accomplish a task efficiently. It may also
provide additional information that is related to a specific subject, or
comment on the results achieved through a previous action.
I.ndicates an operating or maintenance procedure, practice or condition
t
hat, if not strictly observed, could result in injury or loss of life.
Indicates that a particular ta
sk must be carried out according to a certain
standard after disassembly and before re-assembly, otherwise the quality
of the components in question may be adversely affected.
A D J U S T M E N T
R E Q U I R E D
C A U T I O N
C H E C K
P O I N T
W A R N I N G
To Next Page
Loading...
Need help?
General