Epson TM L90 - Page 115

Handling 115
TM-L90/TM-L90 Peeler Model Technical Reference Guide
How to send the error recover command from each of the drivers is as follows.
❏ OPOS ADK
Either use the ClearOutput method or send the error recover command of ESC/POS to the
printer.
For more details, see the manual supplied with your OPOS.
❏ APD (Advanced Printer Driver)
Send the error recover command of ESC/POS to the printer using ControlA font.
For more details, see the manual supplied with your APD and the ESC/POS Command
Reference.
❏ ESC/POS
Send the error recover command to the printer
For more details, see the ESC/POS Command Reference.
Note:
For details on how to obtain the ESC/POS Command Reference, see "Introduction of Control Methods"
on page 85.