Name: Epson TM L90
Brand: Epson
Rating: 5 (1 reviews)

To Next Page

To Previous Page

52 Setup

If [Msw8-2] is OFF, the paper is determined automatically if the printer recovers from the paper

layout error.

Furthermore, the results of automatic paper determination are overwritten if the settings for

paper layout are already saved in the NV memory.

The [Msw 8-4] setting influences the amount of paper fed when the power is turned on or the

cover is opened/closed if the paper layout is not set. Refer to "Setting Paper Layout" on page 59

for the paper layout.

When [Msw 8-6] is set to "Feeding paper to the print starting position at power on is disabled",

the printer does not execute the operation of feeding paper to the print starting position at

power on (the printer executes the operation when its cover is opened and closed). Hence, the

user should note the following points since the printer operates on the assumption that the

paper has already been fed to the print starting position at power on.

a) Turn off the power supply after feeding of paper to the print starting position.

b) Do not open the cover while power is off.

c) If you have opened the cover while the power is off, load the paper in the paper path (peeler

or continuous issuing) while the power is on, and then press the FEED button to initialize the

mechanism (paper feeding operation).

If printing is performed without the operation described above, the paper layout error

(recoverable error) may occur. If the error occurs, recover from the error by the operation

selected with [Msw8-1] or [Msw8-2].

Other manuals for Epson TM L90

Questions and Answers:

Need help?

Do you have a question about the Epson TM L90 and is the answer not in the manual?

General