EasyManua.ls Logo

ergoline ERS 2 - Definitions; Safety Notices

ergoline ERS 2
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 |
rEvision History
Revision: 1.0
Date: 2014-04-15
Comments: Applies to software version 1.0 and later
intEndEd audiEnCE
This manual is geared for clinical professionals. Clinical professionals are expected
to have working knowledge of medical procedures, practices, and terminology as
required for completing these examinations.
styListiC ConvEntions
Control keys (soft keys and hard keys) are emphasized by different styles, e.g.,
Start training or [ Create ].
safEty inforMation
General Information
This manual is an integral part of the device. It should be available to the equip-
ment operator at all times. Close observance of the information given in the man-
ual is a prerequisite for proper equipment performance and correct operation and
ensures patient and operator safety. Please note that information pertinent to
several chapters is given only once. Therefore, read the manual once in its entire-
ty. Also observe the information given in the enclosed separate user manuals (e.g.,
the PC and ergometer user manuals).
To ensure maximum patient safety, the specified measuring accuracy, and inter-
ference-free operation, we recommend using only original accessories available
through Ergoline GmbH. The user is responsible if accessories from other manu-
facturers are used.
Ergoline GmbH is responsible for the effects on safety, reliability, and perfor-
mance of the equipment, only if
· assembly operations, extensions, readjustments, modifications, or repairs are
carried out by Ergoline GmbH or persons authorized by Ergoline GmbH
· the device is used in accordance with the instructions given in this manual.
The warranty does not cover damage resulting from the use of unsuitable acces-
sories and consumables from other manufacturers.
Always consult with Ergoline GmbH if you intend to connect equipment not men-
tioned in this manual.
Parts and accessories must comply with the applicable IEC 60601 safety stan-
dards and/or the configured system must comply with the collateral standard IEC
60601-1-1 "Safety requirements for medical electrical systems".
| 9
safEty inforMation
General Information
Operate the equipment only with power cords certified for the country of use.
All publications reflect the equipment specifications and standards on the safety
of medical electrical equipment valid at the time of printing. All rights are re-
served for devices, circuits, techniques, software programs, and names appearing
in this manual.
No part of this manual may be reprinted without written permission from
Ergoline GmbH.
© 2013 Ergoline GmbH, Lindenstrasse 5, 72475 Bitz, Germany.
Definitions
The safety information in this manual is classified as follows:
Danger
indicates an imminent hazard. If not avoided, the hazard will result in death or se-
rious injury.
Warning
indicates a hazard. If not avoided, the hazard can result in death or serious injury.
Caution
indicates a potential hazard. If not avoided, the hazard may result in minor injury
and/or product/property damage.
Safety Notices
Explosion Hazard
The ERS 2 system is not designed for use in areas of rooms used for medical purpos-
es where an explosion hazard may occur. Potentially explosive atmospheres may
result from the use of flammable anesthetics, skin cleansing agents or disinfec-
tants. Furthermore, great care must be exercised when the system is used in an
oxygen-enriched atmosphere. The atmosphere is considered to be oxygen-enriched
when the room air contains more than 25% of oxygen or nitrous oxide.
Shock Hazard
Before use, verify that the equipment is in correct working order and operating
condition. Check the cables and connectors, in particular, for signs of damage. Re-
place damaged cables and connectors immediately, before use.
Do not expose the equipment to direct sunlight to prevent system components from
reaching inadmissible, high temperatures. The equipment has no additional protec-
tion against the ingress of humidity.

Table of Contents

Related product manuals