ero electronic MKC - Configuration Group 2 [C.Exx]; OUT 1 Function

To Next Page

To Previous Page

CnF. 2

General note on configuration group 1

Exiting from the configuration group 1 the instrument verifies

automatically the programmed span for the linear input.

If it is wrong, the device will show:

CONFIGURATION GROUP 2 [C.Exx]

OUTPUTS CONFIGURATION

- OUT 1 function - [C.E01]

Range: nonE = Output not used

ñAin = Time proportional main control output

SECn = Time proportional secondary control output

ALr.1 = Alarm 1 output

Eun.1 = Event 1 output

Xkc-1-C0.P65 5/29/02, 11:59 AM38

ero electronic MKC - Configuration Group 2 [C.Exx]; OUT 1 Function - [C.E01]