ero electronic MKC - External Control for AUTO;MANUAL Mode; External Control for Local;Remote Set Point Selection; External Control for Reverse;Direct Output Action Selection; Group 5 Default Data Loading

88
Gr.5
- External control for AUTO /MANUAL mode
- [r.E17]
This parameter is available when one of the logic inputs is
configured for Auto/Manual selection.
Range: On the Auto/Manual selection is made by logic input
only
OFF the Auto/Manual selection is made by “Man” key
or serial link only
- External control for local/remote set point
selection - [r.E18]
This parameter is available when one of the logic inputs is
configured for Local/Remote set point selection and “A.I.Añ”
[C.d14] is equal to “norñ”.
Range: On the local/remote set point selection is made by
external contact only
OFF the local/remote selection is made by “RSP”
push-button or serial link only.
- External control for reverse/direct output
action selection - [r.E19]
This parameter is available when one of the logic inputs is
configured for direct/reverse output action selection.
Range: On the reverse/direct selection is made by external
contact only
OFF the reverse/direct selection is made by “Cn.Ac”
[r.d08] parameter or serial link only.
- Group 5 default data loading - [r.E20]
Range: OFF = No loading data
ON = Loading data
Xkc-1-C0.P65 5/29/02, 11:59 AM88