ero electronic MKC - OUT 1 Status; OUT 10 Status; Digital Input Dig.1 Status; Digital Input In.1 Status

CnF. 7
64
C.L01 OUT 1 status
Upper display: VErF
Lower display: OU.1
Range: On = Output enabled (relay energized)
OFF = Output disabled (relay deenergized)
NOTE: By pushing the s or t key it is possible to change
the output state. The setting above described is the
same for the remaining outputs.
C.L02 OUT 10 status
This parameter is available only if the optional card is fitted.
Upper display: VErF
Lower display: OU.10
Range: On = Output enabled (relay energized)
OFF = Output disabled (relay deenergized)
NOTE: By pushing the s or t key it is possible to change
the output state. The setting above described is the
same for the remaining outputs.
C.L03 Digital input dIG.1 status
Upper display: VErF
Lower display: dIG.1
Range: Open = Input open
CLSd = Input closed
NOTE:The setting above described is the same for the
remaining inputs.
C.L04 Digital input In.1 status
This parameter is available only if the optional card is fitted.
Upper display: VErF
Lower display: In.1
Range: Open = Input open
CLSd = Input closed
NOTE:The setting above described is the same for the
remaining inputs.
Xkc-1-C0.P65 5/29/02, 11:59 AM64