VIP-X System Manual
Revision 1.0 VIP-X - 35
6. TECHNICAL DESCRIPTION
6.1. 7767VIPX8X2 SPECIFICATIONS
The 7767VIPX8x2 is an X-LINK enabled VIP Advanced display processor module. It supports up to
eight video inputs distributed from a router via “X-LINK” interconnect. 7767VIPX8x2 supports up to two
unique multi-image display outputs via DVI and HD-SDI. Each DVI output can have an independent
resolution, resolutions range from XGA (1024x768) to WUXGA (1920x1200). 7767VIPX modules are
installed in Evertz 7700FR-D frame, which uses high output power supplies. Up to 4 modules or two
pairs of 7767VIPX8x2 cards can be installed in a single 7700FR-D frame. Each 7767VIPX8x2
occupies half of the 7767VIPX-RP2 rear plate which is a five slot rear plate; up to two 7767VIPX8x2
modules are supported by a single 7767VIPX-RP2 rear plate.
Each 7767VIPX8x2 display module accepts up to 8 sources from the router via X-LINK and can view
any source on both of its display outputs. A single source can be viewed multiple times on either
display. A single source can be replicated up to 120 times across the two displays.
6.1.1. Serial Video Inputs
Standard: 3Gbps (SMPTE 424M), and/or
HD-SDI (SMPTE 292M),
SD-SDI (SMPTE 259M-C)
Number of Inputs: 8
Connector: X-LINK (Evertz proprietary)
Equalization: Automatic to 100m (Belden 1694A)
Return Loss: > 15dB up to 270Mb/s
Embedded Audio: SMPTE 272M-A
6.1.2. Background (Computer) Video Input
Standard: GLINK (Evertz proprietary) requires video to GLINK formatter
Number of Inputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Input Resolution: 640x480 (VGA) to 1600x1200 (UXGA)
Input Impedance: 75Ω
6.1.3. Display Video Output
Standard: VESA (DVI-D) up to WUXGA (1920x1200)
Number of Outputs: 2
Connector: DVI-I
Video: 1V p-p RGB, 60/50 Hz refresh
Impedance: 50Ω
To Next Page
Loading...
